Chop-N-Feed Bucket

ProDig Beet Chopper and Meal Feeding Bucket is available in three sizes from 2m to 2.5m which will suit tractor loaders, telehandlers, articulated loaders & Tractor 3 Point Linkage. This versatile unit is equipped with a hydraulic motor which drives a heavy-duty auger for both chopping and feeding out so there is no need for a PTO drive. The large output on the bucket allows the bucket to unload and chop in a minimal amount of time.

• Auger mover is fitted on the rear of the bucket rather than the side to allow use in close proximity with walls.
• Easy access to all moving parts
• Heavy duty buckets construction to allow for use on all machines.
• Bolt on hitch system mean the bucket can be mounted off centred if required.
• Hardened cutting edge and leading edge
• Available with bolt on hitch system to fit all machines
• Option of right or left-hand side chopping.
• Four minutes per cubic meter chop rate

 

 

  1. Hardened cutting edge and leading edge
  2. Available with bolt on hitch system to fit all machines
  3. Option of right or left-hand side chopping.
  4. Four minutes per cubic meter chop rate

Beet bucket 2.0m 2.3m 2.5m
Width (mm) 2030 2300 2500
Height (mm) 1025 1025 1025
Depth (mm) 1356 1356 1356
Capacity (m3) 1.45 1.64 1.78
Weight (kg) 565 650 700
Shell (mm) 5 5 5
Sides (mm) 5 5 5
Cutting edge (mm) 15x150 15x150 15x150

All measurements approx (±5mm, ±5kg)
Weight excludes brackets as these vary

PRODIG-CHOP-N-FEED-G01
PRODIG-CHOP-N-FEED-G03
PRODIG-CHOP-N-FEED-G02
PRODIG-CHOP-N-FEED-G07
PRODIG-CHOP-N-FEED-G04
PRODIG-CHOP-N-FEED-G05
PRODIG-CHOP-N-FEED-G08
PRODIG-CHOP-N-FEED-G09
PRODIG-CHOP-N-FEED-G06
Previous Next Play Pause
PRODIG-CHOP-N-FEED-G01 PRODIG-CHOP-N-FEED-G03 PRODIG-CHOP-N-FEED-G02 PRODIG-CHOP-N-FEED-G07 PRODIG-CHOP-N-FEED-G04 PRODIG-CHOP-N-FEED-G05 PRODIG-CHOP-N-FEED-G08 PRODIG-CHOP-N-FEED-G09 PRODIG-CHOP-N-FEED-G06

 

 

Ask about this product